Standard

0.18MM Thick DX51D Galvanized Steel Coil

What is Chromated?

What is Chromated Treatment? Chromated treatment involves immersing a metal object in a solution primarily composed of chromic acid or dichromate, resulting in the formation of a protective film on the metal surface. This post-treatment process is commonly used for zinc and cadmium coatings. The following sections will break down the basics, the chemical process, […]

What is Chromated? Read More »

Eletro galvanized

DX51D-Z120 Prepainted Galvanized Steel Coil

DX51D-Z120 Prepainted Galvanized Steel Coil   Introduction DX51D-Z120 prepainted galvanized steel coil is a building material widely used in various industries due to its enhanced durability, superior corrosion resistance, and aesthetic versatility. In this article, we’ll break down its key features, benefits, applications, and provide guidance on selecting this product. Definition DX51D-Z120 Prepainted Galvanized Steel

DX51D-Z120 Prepainted Galvanized Steel Coil Read More »

EN 10169

EN 10169

EN 10169 Table of Contents What is EN 10169? EN 10169 of this European Standard gives the specific requirements for continuously organic coated (coil coated)steel flat products used for building interior applications. It particularly specifies the performance requirements of different product flexibility categories and different corrosion protection categories. General information concerning continuously organic coated steel

EN 10169 Read More »

JIS G3312

JIS G3312

JIS G3312 JIS G3312 is the production standard for Japanese Prepainted hot-dip zinc-coated steel sheets and coils. PPGI color coated steel coil have painting film to cover its surface and protect the steel from rusting, in addition to zinc coating film protection. The service life of PPGI is about 2 times longer than that of

JIS G3312 Read More »

JIS G3321

EN 10215

EN 10215 Table of Contents What is EN 10215? EN 10215 European Standard specifies requirements for continuously hot-dip aluminum-zinc alloy coated flat products made of low carbon steels for cold forming or of structural steels in thicknesses ≤3.0 mm. The thickness is the final thickness of the delivered product after coating. This European Standard applies

EN 10215 Read More »

ASTM A792M

ASTM A792M

ASTM A792M What is ASTM A792M? ASTM A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process. Hot dipped galvalume steel coil is an alloy steel plate composed of 55% Aluminum, 43.5% Zinc,1.5% Silicon. Hot dipped galvalume steel coil demonstrates stable anti-rust and anti-corrosion ability in various acid and alkaline, humid,

ASTM A792M Read More »

Hot Dip Galvalume Aluzinc Steel Coil

JIS G3321

JIS G3321 JIS G3321 JIS G3321 Standard specifies requirements for hot-dip 55 % aluminium-zinc alloy-coated steel sheets (hereafter referred to as sheets), hot-dip 55 % aluminium-zinc alloy-coated steel strips (hereafter referred to as coils), and corrugated steel sheets manufactured by processing sheets into the shapes and dimensions specified in JIS G 3316 (hereafter referred to

JIS G3321 Read More »

EN 10147

EN 10147

EN 10147 Table of Contents What is EN 10147? EN 10147 European Standard specifies requirements for continuously hot-dip zinc-coated flat products. The thickness is the final thickness of the delivered product after zinc coating. This European Standard applies to strips of all widths and to sheets cut from it (> 600 mm width) and cut

EN 10147 Read More »

Scroll to Top

GET A QUICK REQUESTS

Contact Form Demo (#3)
Open chat
Have a question ?
Powered WITOP Steel
Hi, Welcome, Get Free Quote Send us a message!
Only takes a few seconds to reach you.