Industry News

The Complete Guide to Choosing PPGI Coated Steel for Agricultural Buildings

The right PPGI coated steel for your farm building depends on a few linked choices. You match the coating system, zinc coating weight, steel thickness and grade, backcoat, and compliance to the building’s environment and lifespan goals. Agricultural roofing and cladding face constant humidity, ammonia from livestock, weather exposure, and tight maintenance budgets. PPGI handles

The Complete Guide to Choosing PPGI Coated Steel for Agricultural Buildings Read More »

What Are PE, SMP, HDP and PVDF Coatings for PPGI and PPGL?

Industry News / witopsteeladmin

PE (Polyester), SMP (Silicon Modified Polyester), HDP (High Durability Polyester), and PVDF (Polyvinylidene Fluoride) are the four primary paint systems for PPGI and PPGL steel. Each offers distinct trade-offs between cost, durability, and performance. PE provides acceptable color retention for roughly ten years in dry, low-UV environments. HDP approximately doubles that lifespan. PVDF, containing over

What Are PE, SMP, HDP and PVDF Coatings for PPGI and PPGL? Read More »

Steel Coil Inspection Checklist Before Production

Industry News / witopsteeladmin

A steel coil inspection checklist before production verifies surface defects, edge and diameter condition, dimensional accuracy, material specifications, and safety documentation. Uncaught coil issues cause line stoppages, scrap, rework, and defective end products, so you should run this check before the line starts. Catching a bad coil early prevents downtime and wasted material. The review

Steel Coil Inspection Checklist Before Production Read More »

Why Tin-Plated Steel Is Used for Electronic Enclosures

Industry News / witopsteeladmin

An electronic enclosure looks like a simple metal box. The material must meet many demands: corrosion protection, formability, dimensional stability, surface quality, electrical conductivity, solderability, coating compatibility, cost, and production consistency. Why tin-plated steel is used for electronic enclosures comes down to one idea. It combines the strength of steel with the surface properties of

Why Tin-Plated Steel Is Used for Electronic Enclosures Read More »

How to Compare Steel Coil Quotations with Confidence

Industry News / witopsteeladmin

Key Highlights A steel coil price comparison only works when every supplier quotes the same specification. The lowest price tag may hide thinner actual material, lighter coating, or weaker packaging. Procurement teams should compare total cost, not just unit price per metric ton. Ask for a test certificate, packing list, and named required documents before

How to Compare Steel Coil Quotations with Confidence Read More »

How to Check PPGI Paint Adhesion Before Roll Forming

Industry News / witopsteeladmin

A coil that passed the mill report can still fail on the line, and the reason is usually that three different properties got treated as one. PPGI paint adhesion inspection works only when you separate them: adhesion, cohesion and hardness are three different properties, and each has its own failure mode. Adhesion is the bond

How to Check PPGI Paint Adhesion Before Roll Forming Read More »

How to Select Prepainted Galvanized Steel Coil for Garage Door Panels

Industry News / witopsteeladmin

You should check five factors to choose the right prepainted galvanized steel coil for your garage door. Focus on coating type, steel thickness, paint system, warranty, and supplier reliability. These elements directly determine performance and curb appeal. Modern garage doors use prepainted steel. This material withstands harsh weather effectively. PPGI for Garage Doors gives you

How to Select Prepainted Galvanized Steel Coil for Garage Door Panels Read More »

What Paint Thickness Do You Need for PPGI and PPGL Roofing Sheets?

Industry News / witopsteeladmin

You are likely asking the same question: how to choose paint thickness for ppgi and ppgl? The right answer isn’t a single micron number. Standard PPGI coils often specify a 20-25 micron top coat, but this is only a starting point. Your decision depends on the paint type, the metallic coating, and the installation environment.

What Paint Thickness Do You Need for PPGI and PPGL Roofing Sheets? Read More »

How to Choose Steel Coil Hardness for Roofing Sheet Manufacturing

How to Match Steel Coil Hardness with Your Roll Forming Machine

Industry News / witopsteeladmin

A steel coil that looks suitable on paper may still create problems during roofing sheet production. If the material is too soft, the finished profile may lack rigidity. If it is too hard or too strong, roll forming becomes more difficult and may increase the risk of paint cracking, edge defects, or equipment stress. The

How to Match Steel Coil Hardness with Your Roll Forming Machine Read More »

SPCC Cold Rolled Coil

Industry News, Product Introdution / witopsteeladmin

SPCC Cold Rolled Coil SPCC was originally the name of “cold-rolled carbon steel sheets and strips for general use” in the Japanese Standard (JIS G 3141). Many countries or companies directly use it to represent similar steel products they produce. Note: Similar grades include SPCD (cold-rolled carbon steel sheets and strips for stamping), SPCE (cold-rolled

SPCC Cold Rolled Coil Read More »

GET A QUICK REQUESTS